Last week in Part 2 we covered battery care — the single most critical maintenance item on your electric scissor lift. If you’re an electrician (or any contractor) who just bought a 10-year-old Genie GS-1930 or JLG 1930ES, this week we’re focusing on the “General” section of the inspection checklist: safety decals, placards, paint, and overall appearance.
On a 10-year-old machine these items are easy to overlook, but they’re some of the first things an OSHA inspector or insurance auditor will check. Missing or faded decals can get you shut down on a jobsite, and poor appearance can signal that the machine hasn’t been well cared for.
Why Decals and Appearance Matter on an Older Scissor Lift
- Safety — Decals show capacity limits, emergency procedures, and hazard warnings.
- Compliance — Most jobsites and insurers require all placards to be installed, secure, and fully legible.
- Resale value — A clean, fully stickered machine sells faster and for more money.
- Quick visual clue — If the paint is peeling or decals are sun-bleached, it’s often a red flag for other maintenance issues.
Key Items to Check and Fix
- All decals/placards installed, secure, and legible
- No unauthorized modifications
- General structural condition and welds (visual check)
- All fasteners, pins, shields, and covers in place
- Paint and appearance clean and free of heavy rust or debris
- Inspection date clearly marked
OEM Decal Kits from gciron.com (Recommended)
You can purchase decals individually or as complete decal kits. Ordering a full kit is usually faster and ensures you don’t miss anything.
- Genie GS-1930 Complete Decal Kit (Part #232055GT) → Buy Genie Decal Kit here
- JLG 1930ES Complete Decal Kit (Part #1001149795) → Buy JLG Decal Kit here
Pro tip: Watch our quick YouTube video that walks through exactly how to remove the old decals and install the new ones → Visit our YouTube channel @GCIRON
Paint and Touch-Up – Keep It Looking Professional
While you’re doing the decals, take time to touch up any chips, scratches, or faded areas. Fresh paint protects against rust and keeps the machine looking well-maintained.
GCIron carries genuine paint for both brands:
Bottom Line for Contractors
Decals and paint are relatively low-cost fixes (usually $250–$450 in parts plus a couple hours of labor) but they’re non-negotiable for staying compliant. Knock them out during your first annual inspection (already budgeted in Part 1). A clean, fully labeled 19' scissor lift tells your crew, your insurance company, and future buyers that this machine is taken seriously.
Next week in Part 4 (final article): We’ll cover common error codes and user codes on the GS-1930 / 1930ES — what they mean and the quick troubleshooting steps before calling a tech.
Comments
0 comments
Article is closed for comments.